Gray boards. Loose rails. Peeling stain. A gate that drags.
These are symptoms—not a complete diagnosis. The smartest scope separates cosmetic wear from movement, moisture, and structural failure.
Colorado Springs · Deck & fence restoration
Repair the deck.
Restore the fence.
Love the backyard again.
We make worn, loose, sun-beaten decks and fences look worth keeping—with careful repairs, honest recommendations, and finish work built for Colorado.
Owner-ledVeteran-owned25+ years in constructionSmall repairs welcome
01Repair before replaceWhen the structure and value support it
02Clear written scopeWhat is included—and why
03Prep is the finishCleaning, sanding, fastening, protection
04One accountable ownerFrom first look through final detail
The repair-first difference
A bad deck is not always a lost deck.
Sun, snow, water, movement, and failed fasteners can make an outdoor space look worse than the underlying condition. We identify what failed, correct it, prepare the surface, then protect the work.
Show us what yours looks like ↗Solid underfoot. Clean lines. Even color. Details that work again.
The goal is not to hide damage. It is to repair the cause, blend the correction, and leave a surface that is easier to maintain.
- Localized board and fastener correction
- Rail, stair, gate, post, and hardware work
- Cleaning, sanding, painting, staining, and sealing
Deck repair + restorationKeep the good.
Correct the bad.
Correct the bad.
Deck specialist
Make the deck feel dependable again.
We focus on the smaller-to-midsize corrections many replacement-focused contractors pass over. Every scope starts below the surface: support, connections, moisture exposure, and how the deck moves.
01
Boards & fasteners
Split, cupped, soft, lifted, or loose boards; popped screws; failed clips; isolated surface damage.
02
Rails, stairs & framing
Movement, loose connections, stair concerns, trim, fascia, and visible framing issues.
03
Finish recovery
Wash, scrape, sand, spot-prime, stain, seal, or paint based on material and prior coating.
Cedar fence repair + finishStraight. Secure.
Protected.
Protected.
Fence specialist
Repair the line without replacing the whole yard.
Colorado wind, irrigation, soil movement, and UV exposure rarely damage every component equally. A targeted fence scope can restore strength, alignment, privacy, and curb appeal.
01
Posts & rails
Failed posts, loose rails, leaning runs, and connection points evaluated section by section.
02
Pickets & gates
Broken cedar, gaps, warped boards, dragging gates, latches, hinges, and alignment.
03
Stain, seal & paint
Surface prep and the right coating for existing wood, exposure, appearance, and upkeep goals.
How the work gets better
Inspect. Correct. Prepare. Protect.
A finish only lasts as well as the surface and structure beneath it.
Inspect
Trace movement, moisture, surface failure, and the extent of damaged material.
Correct
Stabilize the problem and replace only the components that should not remain.
Prepare
Clean, dry, scrape, sand, mask, and create the surface the product requires.
Protect
Apply the selected system evenly and explain practical cure time and upkeep.
Five-minute deck check
What is your deck telling you?
Select every condition you can see or feel. This quick guide helps you describe the project when you request an estimate.
Educational only; not a substitute for an on-site structural or code inspection.
Your planning signalStart here
Choose every symptom you see. This is a planning guide—not a structural inspection.
Include this in my request →Material intelligence
The product follows the problem.
Wood, composite decking, and existing coatings behave differently. The right plan respects the material instead of forcing one treatment onto every surface.
Fiberon & similar systems
Composite boards usually are not sanded or stained like wood. Repair may involve matching boards, hidden fasteners, fascia, rail components, or the wood framing beneath the surface.
- Identify product and profile
- Check clips, gaps, and support
- Follow manufacturer care guidance
Cedar fence & deck components
Cedar can often be repaired and refinished when deterioration is localized. Moisture, sun, prior finish, and surface soundness guide preparation.
- Replace failed wood first
- Prepare to an even condition
- Choose a maintainable finish
Stain, paint, or sealer?
There is no universal “best.” Transparent products show grain, solid stains create consistent color, and paint can work on suitable vertical or previously painted surfaces.
- Confirm coating compatibility
- Respect dry and cure windows
- Plan future maintenance now
Finish guide
Choose for the next maintenance cycle—not only day one.
SystemWhat it does wellPlanning note
Semi-transparent stainShows wood character and tones colorBest on sound, properly prepared wood
Solid-color stainCreates even color while following texturePreparation and compatible prior coating matter
Exterior paintStrong color and film build on suitable surfacesNot the automatic choice for deck walking surfaces
Clear or tinted sealerWater repellency with a natural appearanceUV protection and maintenance intervals vary
Colorado exterior calendar
Good timing protects good work.
The small jobs,
fixed and finished right.
Steve Fuqua · Owner
One person accountable for the details.
Springs Fix & Finish is an owner-led, veteran-owned Colorado Springs company built for the repairs and restoration projects larger contractors often decline. Steve brings more than 25 years of construction, estimating, field coordination, business ownership, and facilities experience to the work.
The standard is straightforward: explain what is happening, recommend a practical scope, protect the property, communicate clearly, and finish cleanly.
25+ years construction experience1 accountable ownerLocal Pikes Peak region
Before you request an estimate
Straight answers.
Not sure whether the project is “big enough”? Smaller repairs and finish work are exactly where Springs Fix & Finish is designed to help.
Can you repair only part of my deck or fence?+
Yes. Localized repair is a core service when the remaining structure and materials are worth keeping. The estimate will explain what can remain and what should be corrected.
Can you make repairs to Fiberon composite decking?+
Potentially. The first step is identifying the board, profile, fastening system, and whether the visible issue comes from the surface or the framing beneath it. Availability of compatible material affects the final scope.
Do you stain and refinish after repairs?+
Yes. Repair and finish can be planned together so replacement wood, existing surfaces, prep, color, and coating compatibility are considered as one system.
What if hidden damage is found?+
The problem is documented and explained before the scope grows. You receive a clear recommendation rather than a surprise at the end.
Which areas do you serve?+
Colorado Springs and nearby Pikes Peak communities, including Monument, Black Forest, Falcon, Fountain, Manitou Springs, Security-Widefield, Briargate, and Woodland Park.
What should I send for an estimate?+
A short description, your ZIP code, and wide plus close-up photos are helpful. Include movement, softness, peeling, prior coatings, access concerns, and the result you want.
Request an estimate
Show us what needs to look great again.
Tell Steve what is loose, damaged, faded, peeling, or simply unfinished. A clear first message helps determine the right next step.
Colorado Springs · Monument · Black Forest · Falcon · Fountain · Manitou Springs · Security-Widefield · Briargate · Woodland Park